3dprinting contest Archives - Open Electronics https://www.open-electronics.org/tag/3dprinting-contest/ Open source electronic projects Mon, 27 Oct 2014 13:27:19 +0000 en-US hourly 1 https://wordpress.org/?v=6.6.1 https://www.open-electronics.org/wp-content/uploads/2015/08/cropped-logo-32x32.jpeg 3dprinting contest Archives - Open Electronics https://www.open-electronics.org/tag/3dprinting-contest/ 32 32 32754084 Here are the Winners from the 3Drag 3d printing contest https://www.open-electronics.org/here-are-the-winners-from-the-3drag-3d-printing-contest/ https://www.open-electronics.org/here-are-the-winners-from-the-3drag-3d-printing-contest/#respond Mon, 27 Oct 2014 13:27:19 +0000 http://www.open-electronics.org/?p=10544 Here we are, eventually the contest has come to an end and after a short consultation we have chosen the winners! Before announcing them, a few words. First of all, thanks to everyone who submitted his contribution. All the works reviewed are great and must be praised, because they represent without exception a hard work, […]

The post Here are the Winners from the 3Drag 3d printing contest appeared first on Open Electronics. The author is Luca Ruggeri

]]> https://www.open-electronics.org/here-are-the-winners-from-the-3drag-3d-printing-contest/feed/ 0 10544 Updates from the 3Drag 3dprinting contest: Roland Hoffert’s Hacks https://www.open-electronics.org/updates-from-the-3drag-3dprinting-contest-roland-hofferts-hacks/ https://www.open-electronics.org/updates-from-the-3drag-3dprinting-contest-roland-hofferts-hacks/#respond Sat, 18 Oct 2014 09:09:30 +0000 http://www.open-electronics.org/?p=10108 Roland Hoffert, from www.eytec.de, submitted us this 3Drag (Velleman K8200 version) hack to improve the z-wobble issue, one of the most known problems affecting the RepRap family printers. Roland identified one of the weak points that could cause the z-wobble in the fixed coupler of z-stepper motor. With the standard fixing, when the z-stepper moves […]

The post Updates from the 3Drag 3dprinting contest: Roland Hoffert’s Hacks appeared first on Open Electronics. The author is Luca Ruggeri

]]> https://www.open-electronics.org/updates-from-the-3drag-3dprinting-contest-roland-hofferts-hacks/feed/ 0 10108 Updates from the 3Drag 3dprinting contest: Karl Seiss’s Hack https://www.open-electronics.org/updates-from-the-3drag-3dprinting-contest-karl-seisss-hack/ https://www.open-electronics.org/updates-from-the-3drag-3dprinting-contest-karl-seisss-hack/#respond Sun, 12 Oct 2014 17:27:12 +0000 http://www.open-electronics.org/?p=10130 Karl Seiss from Austria made a very clever hack to a K8200 3DRag printer, turning it into a CNC drilling and milling machine. We didn’t receive from the author many details, anyway it used Proxxon long shaft drills to have a highly reliable and powerful tool. Moreover, Karl built by himself also a “vacuum support” […]

The post Updates from the 3Drag 3dprinting contest: Karl Seiss’s Hack appeared first on Open Electronics. The author is Luca Ruggeri

]]> https://www.open-electronics.org/updates-from-the-3drag-3dprinting-contest-karl-seisss-hack/feed/ 0 10130 Updates from the 3Drag 3dprinting contest: Fa)(a from Giacomo Falaschi https://www.open-electronics.org/updates-from-the-3drag-3dprinting-contest-faa-from-giacomo-falaschi/ https://www.open-electronics.org/updates-from-the-3drag-3dprinting-contest-faa-from-giacomo-falaschi/#respond Thu, 09 Oct 2014 17:26:45 +0000 http://www.open-electronics.org/?p=10113 Giacomo Falaschi sent us his Falla3D new printer project: you can have more details on the project by looking to this interview here. Fa)(a is a fully modular and scalable printer, able to print with any material (FDM technology) and entirely customizable in every single aspect and component. Here are some figures: Resolution: X-Y axis […]

The post Updates from the 3Drag 3dprinting contest: Fa)(a from Giacomo Falaschi appeared first on Open Electronics. The author is Luca Ruggeri

]]> https://www.open-electronics.org/updates-from-the-3drag-3dprinting-contest-faa-from-giacomo-falaschi/feed/ 0 10113 Updates from the 3Drag 3dprinting contest: FDM 3D from Scanners, from Hesam Hamidi https://www.open-electronics.org/updates-from-the-3drag-3dprinting-contest-fdm-3d-from-scanners-from-hesam-hamidi/ https://www.open-electronics.org/updates-from-the-3drag-3dprinting-contest-fdm-3d-from-scanners-from-hesam-hamidi/#respond Mon, 06 Oct 2014 08:27:49 +0000 http://www.open-electronics.org/?p=10127 This is an unusual project submitted by prof. Hesam Hamidi, who built a linear Delta printer by using recycled parts from old scanners and dot matrix printers. This FDM 3D printer has been designed and built in 2013. Here are few specs: Build volume: 200x200x200 mm Footprint: 600×650 mm Print surface: 200×200 mm heated glass […]

The post Updates from the 3Drag 3dprinting contest: FDM 3D from Scanners, from Hesam Hamidi appeared first on Open Electronics. The author is Luca Ruggeri

]]> https://www.open-electronics.org/updates-from-the-3drag-3dprinting-contest-fdm-3d-from-scanners-from-hesam-hamidi/feed/ 0 10127 Updates from the 3Drag 3dprinting contest: Alessio Fusi’s Hack https://www.open-electronics.org/updates-from-the-3drag-3dprinting-contest-alessio-fusis-hack/ https://www.open-electronics.org/updates-from-the-3drag-3dprinting-contest-alessio-fusis-hack/#comments Thu, 02 Oct 2014 22:05:34 +0000 http://www.open-electronics.org/?p=10174 Alessio Fusi hacked his 3Drag/K8200 printer by replacing the original threaded rod with a trapezoidal rod, assembled with a gearbox between it and the stepping motor with a reduction rate of 50:20. In a short time, Alessio will replace the gearbox too (fully printed with the printer itself) with a 30:10 ratio that, together with […]

The post Updates from the 3Drag 3dprinting contest: Alessio Fusi’s Hack appeared first on Open Electronics. The author is Luca Ruggeri

]]> https://www.open-electronics.org/updates-from-the-3drag-3dprinting-contest-alessio-fusis-hack/feed/ 1 10174 Updates from the 3Drag 3dprinting contest: Richard Tegelbeckers’s DeltaTrix 3D https://www.open-electronics.org/updates-from-the-3drag-3dprinting-contest-richard-tegelbeckerss-deltatrix-3d/ https://www.open-electronics.org/updates-from-the-3drag-3dprinting-contest-richard-tegelbeckerss-deltatrix-3d/#respond Mon, 29 Sep 2014 17:28:13 +0000 http://www.open-electronics.org/?p=10123 Richard Tegelbeckers joined the 3Drag 3dprinting contest by sending us his project, a 3D Delta printer named DeltaTrix 3D, under the category 3D Making. The project is based on the fully open source linear Delta printer, power by a 32-bit ARM processor (Arduino). The resolution is high, allowing potentially 25 micron layers, and a special […]

The post Updates from the 3Drag 3dprinting contest: Richard Tegelbeckers’s DeltaTrix 3D appeared first on Open Electronics. The author is Luca Ruggeri

]]> https://www.open-electronics.org/updates-from-the-3drag-3dprinting-contest-richard-tegelbeckerss-deltatrix-3d/feed/ 0 10123