Comments on: 3Drag as a CNC milling machine: Creating G-Code via EAGLE software https://www.open-electronics.org/3drag-as-a-cnc-milling-machine-creating-g-code-via-eagle-software/ Open source electronic projects Sun, 07 May 2017 14:45:00 +0000 hourly 1 https://wordpress.org/?v=6.6.1 By: Stoenescu Marius https://www.open-electronics.org/3drag-as-a-cnc-milling-machine-creating-g-code-via-eagle-software/#comment-12467 Sun, 07 May 2017 14:45:00 +0000 http://www.open-electronics.org/?p=7223#comment-12467 Hello,

First of all thank you for a so well written article.
I followed your instructions and i was able to export the gcode file and load it into repetier software. The only problem is that the pcb my cnc drew is about two times smaller than the pcb in eagle. Any ideeas?

Thank you!

]]> By: [UM2] Laser Addon – Part 2 at g3gg0.de https://www.open-electronics.org/3drag-as-a-cnc-milling-machine-creating-g-code-via-eagle-software/#comment-11842 Fri, 26 Feb 2016 22:03:35 +0000 http://www.open-electronics.org/?p=7223#comment-11842 […] looked for some EAGLE scripts that will output already useful G-code and was successful with PCB-GCODE. Some modifications were to do, but i was able to output G-code that switches the fan output […]

]]> By: Creating G-Code via EAGLE software - Electronics-Lab https://www.open-electronics.org/3drag-as-a-cnc-milling-machine-creating-g-code-via-eagle-software/#comment-11775 Sun, 10 Jan 2016 11:00:50 +0000 http://www.open-electronics.org/?p=7223#comment-11775 […] Creating G-Code via EAGLE software – [Link] […]

]]> By: 3Drag as a CNC milling machine: Creating G-Code... https://www.open-electronics.org/3drag-as-a-cnc-milling-machine-creating-g-code-via-eagle-software/#comment-10194 Mon, 27 Jan 2014 10:56:25 +0000 http://www.open-electronics.org/?p=7223#comment-10194 […] To create a PCB with 3Drag , by milling , it is necessary to have the G-Code files for the tracks patterning and for the holes relating to the printed circuit board itself.  […]

]]>